Tải tài liệu
MI 3394 ST CE MultiTesterXA
The STANDARD set is defined based on typical requirements for smaller production. The instrument’s intuitive touch screen display enables easy selection of required tests and test limits for fast test execution. Test limits are used for PASS/FAILL evaluation, results of the test can be stored under different memory structure levels. The set enables execution of all available single tests. Optionally, the user can also use barcode scanner for entering the equipment’s ID.
The STANDARD set is defined based on typical requirements for smaller production. The instrument’s intuitive touch screen display enables easy selection of required tests and test limits for fast test execution. Test limits are used for PASS/FAILL evaluation, results of the test can be stored under different memory structure levels. The set enables execution of all available single tests. Optionally, the user can also use barcode scanner for entering the equipment’s ID.
Measuring functions
- High Voltage, programmed (AC/DC);
- High Voltage, burn test (optional A 1560);
- Continuity tests;
- Insulation resistance measurement;
- Substitute leakage current;
- Differential leakage current;
- Touch leakage current;
- PE-leakage current;
- Discharge time;
- Functional test (power P/S/Q, voltage, current, cos fi, frequency, ThdU, ThdI,PF).
Key features
- Creation of structure with dedicated tests.
- PASS/FAIL evaluation of test results.
- Execution of all single tests.
- Programmable High Voltage (AC + DC) test.
- 4-wire continuity test.
Technical data
- Dimensions (w x h x l): 43,5 x 29,2 x 15,5 cm
- Mass (without accessories): 17 kg
Standards
Functionality
- IEC 60335 Household and similar electrical appliances
- 61439 Low-voltage switchgear and controlgear assemblies
- IEC 60598 Luminaires
- IEC 60950 Safety of information technology equipment
- IEC 61010 Safety requirements for electrical equipment
- VDE 0701-702 Inspection after repair, modification of electrical appliances – Periodic inspection on electrical appliances General requirements for electrical safety
- EN 50191 Erection and operation of electrical test equipment
Safety
- EN 61010-1
- EN 61010-2-030
- EN 61010-031
- EN 61557
EMC
- EN 61326-1
MI 3394 Standard set
- Instrument MI 3394 CE MultiTesterXA
- HV test lead 5m, without pistols, 2 pcs, S 2073
- Continuity test lead, 2.5 m, 2 pcs
- Continuity test lead, red, 1.5 m
- Insulation test lead, red, 2.5 m
- Insulation test lead, black, 2.5 m
- Crocodile clip, black, 3 pcs
- Crocodile clip, red, 2 pcs
- Discharge time cable
- Mains cable
- Bag for accessories
- Calibration certificate
- RS 232 cable
- USB cable
- CD with instruction manual (full version)
- Metrel ES Manager BASIC license*
For more detail information: click here>>>
For specifications: click here>>>
